Schrader Valve Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement schrader valve cap for cars, motorcycles, and bicycles. Print it solid, no need for supports. I didn't…
- Rating
- 4.5 / 5
- Likes
- 11
- Downloads
- 111
- Makes
- 1
- Views
- 585
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Replacement schrader valve cap for cars, motorcycles, and bicycles.
Print it solid, no need for supports.
I didn't model interior threads so that when this is installed the valve will cut its own threads. This allows for a very snug fit and will prevent it from loosening. Due to this you must have your horizontal expansion calibrated to prevent it being overly difficult to thread onto your valve stem. Alternatively you can scale the model approximately ~3% on the X and Y axis to make it significantly easier to thread, but I can't guarantee it'll hold longterm if done this way as I haven't tested doing it this way.
At least with this color filament, it has handled both Midwestern Winter and Summer temperatures in full sun so far.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Infill:
100
Filament:
Amolen PLA
Glow in the dark blue
Category: Automotive