Formula B1 Remix - ESP32 Bluetooth
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix customize the shell to use a ESP32 Bluetooth with battery and chager module.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 110
- Makes
- 1
- Views
- 1,682
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Note: This is a remix. Download the other parts here:
https://www.printables.com/model/74032-formula-b1-remix-arduino-pro-micro
In addition to what you need in the original model, you may need:
1x ESP32 with Bluetooth (CH340C 30pins USB-C)
1x TP4056 USB-C Charger Module
1x DC Step Up Module MT3608
1x 3.7v Rechargeable Lithium Battery
1x Switch On/Off
1x LED 3.3v
10x 12mm Buttons
2x Encoder with Button EC11
2x Micro Switchs
1x Resistors 220Ω
2x Resistors 100kΩ
2x 8x3mm Magnets
I'm using an original 18650 li-ion 3000mah and it holds about 18h.
Note: Fake batteries hold only 1h.
Use hot glue from the hole to the led:
Hole for TP4056 Charger Module LED
Hole for a LED connected to 3.3v from ESP32