MS2000 Light Marker Prop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple MS2000 Distress Light Marker Prop for your cosplay needs.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 60
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Back with another pretty simple prop.
Printing this should be very straightforward. Assembly is just as easy but depending on your printer you might want to scale down the lower part by just a percent or two. In my case it perfectly fit.
Clipping the front part on shouldnt be too hard but you should be careful since it could break, if stressed too much. Once it sits in position it should be perfect.
I used a mini printer for the label. Label is also uploaded. Sadly printables doesnt allow me to upload it as a file, so you will have to save the picture from the site or from here:
