1 / 4
[IKEA ÖVERSIDAN] magnetic LED Clip v2.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic clip mount for ÖVERSIDAN LED where usual mounting system can't be used (e.g. inside IKEA BROR cabinet)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this clips for IKEA ÖVERSIDAN LED (wardrobe lighting strp w sensor) inside a IKEA BROR cabinet. The 60x3.5mm variant for the lower part (below the shelf), the 50x23.5mm variant for the upper part (below the top side).
You need per clip:
- 2x countersunk head screw M3 x 10
- 2x insert M3 x 5 x 4.2
- 1x Rectangular Pot Magnet w. 2x Counterbores, 50/60 x 13.5 x 5 (N35 should be fine)
NOTE: Do not tighten the screws too tightly (the magnet may split).
Easy mounting of this bracket to LED by slide on from side.
Printed with PET-G filament from FIBERLOGY (EASY PET-G).