Mazda B2200 pickup shackle spacers for lowered springs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shackle spacers to fit a stock length T-100 pickup shackle for use on a Mazda B2200 pickup using the Belltech lowering…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Shackle spacers to fit a stock length T-100 pickup shackle for use on a Mazda B2200 pickup using the Belltech lowering springs. These springs are longer than the stock Mazda springs and thus cause the spring shackle to contact the frame.
Using a 1" longer than stock shackle (4.5" vs. 3.5") prevents the shackle from rotating back so far. Stock Toyota T100 spring shackles, pictured in photo 1: https://amzn.to/3STn5Fp
Dimensions: https://www.4crawler.com/4x4/ForSale/Shackles.shtml#FAQ10
T100 upper width is 113mm, Mazda is 88mm, difference 25mm, split into 2 - 12.5mm spacers placed on either side of the upper shackle hanger bushing will make up that difference. You'll need 4 spacers in all, 2 per shackle on top.
These spacers provide a way to use an inexpensive set of stock Toyota T100 spring shackles on a lowered Mazda B2200 pickup. Combine these shackles with a set of lowering/relocation blocks:
https://www.printables.com/model/1179160-leaf-spring-relocation-plate-or-liftlowering-block
Several options for making these:
- Print in a flexible filament like TPU, it will act like part of the spring eye bushing.
- Or, use 3/4" washers to fill in the gap on each side as well
- Or cut spacers out of 1/2" plastic/metal sheet or plastic/metal rod stock, as pictured in the 2nd photo.
These spacers can be used on other spring shackles. For example to make a "wide body" shackle, such as can be used on a front spring with through the frame spring hanger on a Toyota pickup or 4Runner. For this, you need approx. 3/4" or 19mm thickness and if you make the spacers out of steel, they can be welded to the shackle side plates if desired. Simply use a hole saw of the desired OD and cut 4 spacers out of 3/4" x 2" bar stock, and drill the ID out to accommodate your shackle bolts, 14mm or 18mm typical.
Category: Automotive
