Replacement rail for IKEA dresser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement rail for ikea dressers, a bit unsure of exact model. but the rails are 310mm with three pegs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
The model is split into two parts to make it easier to print. Unfortunately it does not fit on the bed of a 200x200, but should fit diagonally on a 220x220 or larger bed size
- Rail
usable by itself by screwing it in place
- Pegs
to be used in the existing holes from the original Ikea rail.
I chose to prep the rails by superglueing the pegs into place by putting a bit of glue around the peg before pushing int in place in the rail.
I would also generally recommend making the pegs for increased strength and easier alignment.
The rails fit perfectly on my dresser, and i would even trust it with just the pegs
if the fit is a bit off on your dresser maybe scale just the length by a percent or so.