Replacement rail for IKEA dresser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement rail for ikea dressers, a bit unsure of exact model. but the rails are 310mm with three pegs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
The model is split into two parts to make it easier to print. Unfortunately it does not fit on the bed of a 200x200, but should fit diagonally on a 220x220 or larger bed size
- Rail
usable by itself by screwing it in place
- Pegs
to be used in the existing holes from the original Ikea rail.
I chose to prep the rails by superglueing the pegs into place by putting a bit of glue around the peg before pushing int in place in the rail.
I would also generally recommend making the pegs for increased strength and easier alignment.
The rails fit perfectly on my dresser, and i would even trust it with just the pegs
if the fit is a bit off on your dresser maybe scale just the length by a percent or so.