1 / 3
T8 Torx key to 1/4" hex Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for the Prusa T8 Torx key to fit in an 1/4" hex. Especially for the TORQUEY nozzle torque wrench.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 1
- Views
- 147
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for the Prusa T8 Torx key to fit in an 1/4" hex, especially for the TORQUEY nozzle torque wrench. I recommend to use a M3x12mm screw and a M3 nut to secure the key, but if you dont want to permanently attach it you can use it without the screw.
This wont hold much, but for the requiered torque for the Nextruder nozzle it is plenty enough when printed out of PETG with enough walls.