1 / 4
ESP Devkit C V4 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for ESP32_Devkitc_v4 with exposed or covered pins, and provision for external antenna
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
ESP32_Devkitc_v4 Case
This is a case for the ESP32_Devkitc_v4 (28X48mm PCB) that will accommodate an ESP32 with pcb antenna or ufl external antenna.
Printing:
- No supports
- Tested with PLA and PLA-CF
- Well calibrated printer. Tolerances are tight and overhang is 50 degrees
For exposed pins:
- Print the base and holder flat sides down. Note the orientation of the holder there is an angle on the tang
- Connect the holder with 2, 2x4mm socket head screws and washers, or glue
For covered pins:
- Print the base and back with flat sides down
- Connect the back with 2, 2x12mm socket head screws
The fusion 360 file is included so you can modify to your needs.