1 / 3
150mm Airconditon to 100mm wall vent adapter — image 1
1 / 3

150mm Airconditon to 100mm wall vent adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

150mm air condition hose to 95mm wall vent (designed for 100mm wall vent)

Rating
0 / 5
Likes
9
Downloads
140
Makes
1
Views
448
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Needed an adapter for my argo swan evo airconditon for my wall vent.

Print in PETG, PLA will become too soft from the hot exhaust air. PETG with a heat deflection point of 71c seems to be holding strong. But I haven't had my AC on for longer than 5 hours during testing.

Also recommend either printing a TPU gasket or salvage one from the previous insert. I salvaged a rubber seal from the original Flexit 09169 wall vent

Mine was printed in 0.28mm with snug supports everywhere 15% gyriod infill using Clas Ohlson (FlashForge) PETG in black

 

NOTE: The flow rate for a 100mm tube is about 100-150m3. If your AC outputs more than this it will be working overtime to try to get that air out. Meaning your fan motors will be working overtime. There is a very real possibility on cheaper/low quality ACs that the fan motors will burn out. 

Tags