CMF Phone 2 Pro - Norsewood Backcover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A variation of the original Backcover taking cues from the BeoLab 18 that came out 2013, combining real wood and PLA.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 21
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Backstory:
I worked 20 years for Bang & Olufsen, and that company is still very close to my heart.
I also just bought a cmf 2 pro, together with the buds 2 and the smartwatch 2.
The Inspiration and Designprocess:
This out of the way, i wanted to take part in this contest but only with a backcover/case,
and base that on my favourite B&O speaker the BeoLab 18 which came out in 2013.
(While designing this i heard that the Fractal North PC-Case could be seen as an inspiration too, but it was actually not. :) )
For this case/backcover i wanted to do only one half of the phone with slats from real wood to keep the case rigid enough, and i also wanted to keep it relatively flat.
Thats why i designed it the way i did with 1mm thick wood or 2mm thick wood.
This is also the reason there are two different models, the one for 2mm thick wood is the “1a”, while the one for 1mm thick wood is the "1". I named it that way, because while brainstorming designs these both were the first of 3 designs, and in the end i only kept this first one.
Its easier to work with 2mm thick wood, but it looks better with 1mm thick wood.
You can ofc combine this like you like, with any wood you want, or print the woodparts too and not lasercut that, or do one with lasercut acrylic.
I also designed modifications for my cmf buds 2 case and the cmf smartwatch 2 fitting to the respective models.
Let me know if youre interested in the files for that.
Attention:
The round cornerknob-screw is the only one that doesnt work with the models, like with the original case too. I may be waiting for the original Modscrews from CMF here, or maybe later do one design with a normal screw myself.
The “Lens Insert.stl” is the original unaltered file from cmf. You can use it, you dont have to, the backcover also works without that. On all the photos here you see it with the lens insert.
How to print this:
you can simply put it flat and print it in 0.10mm layerheight. I would add brims to the camerapart, the rest doesnt really need it if your heatbed has no adhesionproblems.