1 / 3
Replacement adapter Turbomax Air Station Bravo by Scoprega
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement adaptor for 12v air pump Turbomax air station bravo by scoprega.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
The thread is meant to screw in the air hose with the product.
Print instructions:
Print canted 45° to strenthen the part. Try the STL with inbuilt support. I also suggest using a 5mm brim with 0mm separation gap to stabilize the print.
Material:
Use ASA or better for the heat resistance, the air going out of the pump gets quite hot.
PETG will work only briefly and will melt after longer usage.
