Universal Laser Focus Ramp – 0 to 35mm Fine Focus Calibration Tool (SVG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Laser focus ramp with a precise 0–35 mm height, vertical marks every 0.5 mm and engraved numbers every 1 mm of Height.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 77
- Makes
- 0
- Views
- 427
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Laser Focus Ramp (SVG Included) — Fine Focus Calibration Tool
This focus ramp is a practical and universal tool for quickly and accurately finding the optimal focus distance for any laser engraver or cutter (diode, CO₂, or fiber).
It is a trapezoidal plate meant to be laser-cut or engraved, with a sloped surface ranging from 0 mm (high starting point) to 35 mm (lower endpoint) and a total base length of 200 mm.
Along the slope, there are vertical marks every 0.5 mm of height, with engraved numbers every 1 mm. This allows you to precisely identify the ideal focal distance by seeing at which mark your laser produces the thinnest, cleanest line.
How to Use
Cut or engrave the ramp using the provided SVG file (true scale, 1:1 in mm).
Place the ramp on your laser’s workbed, with the higher side (0 mm) under the laser head as your starting reference.
Lay a piece of white paper or masking tape over the sloped surface.
Engrave a straight line along the X-axis (from left to right, along the ramp), either with your software’s line function or by manually moving the head.
Inspect the engraved line: the spot where the line is thinnest and most sharply defined is the perfect focal point.
Read the height directly on the ramp at the mark closest to this ideal point: this is your optimal focus distance from the work surface!
Technical Details
Base length: 200 mm
Height: from 0 mm (left/high) to 35 mm (right/low)
Vertical marks: every 0.5 mm of height
Numbering: every 1 mm of height (engraved, 3 mm high, always legible)
File provided: SVG at true scale (can also be converted to DXF)
Compatible with: any laser cutting/engraving software (LightBurn, LaserGRBL, RDWorks, Inkscape, etc.)
Tips
Works great on MDF, plywood, acrylic, or even as a template for 3D printed calibration jigs.
For repeated use, cover the ramp with masking tape and engrave each new focus test onto the tape.
Useful for any optical setup where you need precise focal distance calibration.
Files Provided
rampa_focus_finale_200mm_smallfont.svg — Complete SVG ready for laser cutting/engraving at real-world scale