1 / 4
ACA Screamer S-10 Siren (Fully Functional)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a fully functional ACA Screamer S-10 project. This model working with a DC 130 Motor.
Parts you need
- DC 130 Motor
- Superglue or other adhesives
- A battery or a other power source
How to build
Its not difficult to build but there are important steps. First you can glue the motor on the chopper and the stator. Now you can put the cables on the motor. Next you glue the motor to the base. Finally you can put the front roof at the stator and the roof on the front roof.
Printer Settings
- Infill: 10%
- Brim: No
- Supports: Yes
- Filament: All
Electrical Hardware
For the Hardware use can you build your own control. I recommend using Arduino for control. For run the motor can you use a 9V battery or a usb cable.
WARNING! This siren can be very loud. The more power you supply, the louder the siren will be!
Which sirens should I make next? Feel free to write your opinion in the comments :)