1 / 3
Bike Chain Fidget (Print in Place!) — image 1
1 / 3

Bike Chain Fidget (Print in Place!)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bike chain-like fidget toy with two sizes. An easy print in place model! Updated 2025-06-10 for better bed adhesion.

Rating
5 / 5
Likes
105
Downloads
1,082
Makes
3
Views
3,093
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I absolutely adored the idea behind @JamesThePrinter's Chain Link Fidget (Print-In-Place), but I found that I didn't like that the links were different sizes. I also found the “large” size a little too small for my hands, so I designed my own fidget toy from the ground up.

This bike chain fidget was designed to be used like worry beads, with the links passed between your thumb and forefinger (but you do you!). This is designed to be a forgiving model, but if you have any concerns about your printer's accuracy, print the test links first. 

Gently flex any frozen links, and they should start moving.

Updated 2025-06-10 for better bed adhesion.

Features

  • 2 versions: chunkier and easier to print, or more angled (with slightly less bed adhesion)
  • 100% print in place
  • Links are equally-sized
  • Generous clearances (~0.3mm), which most printers should be able to handle
  • Multiple sizes: 18 links for one hand, 22 links for one or two hands*
  • Easily printed as multi-color (M600 at layer 27)
  • Fast print! Between 45-90 minutes,  depending on your printer

Recommended Settings

  • Layer Height: 0.20mm (essential to print properly!) 
  • Walls: 2 or 3
  • Infill: 15%
  • Material: Any except TPU
  • Supports: No
  • Change Orientation: No
  • Brim: No

* Message me if you'd like a larger or smaller version uploaded

Tags