1 / 10
Creality Ender 3 V3 SE/KE 5020 fan shroud/duct — image 1
1 / 10

Creality Ender 3 V3 SE/KE 5020 fan shroud/duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fan shroud designed for 5020 fan with large opening for Creality Ender 3 V3 SE/KE series

Rating
0 / 5
Likes
8
Downloads
48
Makes
0
Views
742
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A simple 5020 fan mount for the Creality Ender 3 V3 SE/KE.

NOTICE!!!
In order too use this mod on the Ender 3 V3 SE, you must be using the linear rail mod first before proceeding due to clearance issues. this one is recommended: https://www.printables.com/model/716958-linear-x-rail-mod-ender-3-v3-se

PRINT SETTINGS:

  • 4 walls/tops/bottoms
  • PETG or better at heat deflection and deformation
  • tree/organic manually painted supports

BOM: 6€~

You will also need a soldering iron OR you can use these K1 UY connectors if you can't solder: https://vi.aliexpress.com/item/1005005691915713.html

PARTWHERE TO ORDERPRICE
5020 FANhttps://vi.aliexpress.com/item/1005005075120773.html3.5€~
1.25 JST CABLEhttps://vi.aliexpress.com/item/1005006000650469.html1€~
HEAT SHRINK (2-3mm ID)https://vi.aliexpress.com/item/1005004539897586.html1€~

NOTICE!!!

YOU MUST ORDER THE 24V VERSION OF THE FAN!!!

I would personally recommend to search for the parts yourself, you might be able to find it for cheaper too

ASSEMBLY:

I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR MACHINE WITH THIS MOD

  1. Cut of the end of the 5020 fan JST connector
  2. PLEASE CHECK THE POLARITY OF YOUR 1.25 JST CABLE AND THE ORIGINAL CABLE ON THE PRINTER. THE RED AND BLACK WIRES MAY BE REVERSED. IF WIRED INCORRECTLY, YOU MIGHT BLOW YOUR FAN CONTROLLER!!!
  3. Solder or use K1 connector to splice and connect the correct polarity wires together, forming a fan with 1.25 jst connector at the end
  4. Insert the fan into the printed housing (it will be a tight fit, you must push it in fully)
  5. Screw the whole assembly using the original screws back onto the print head
  6. Done

Thanks for reading and I hope this mod helps you in some way!!

Tags