(BETA) Trailer and Hitch for Ride-Ons. V1 now available!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight 90% printed. Make yard work fun for kids! Children's trailer for towing behind a kids ride-on vehicle.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Designed this for my son's 12v ride-on toy. He gets to help with yard work in a fun way, and gets to learn a little about backing up a trailer. The whole assembly is lightweight and pulls with no trouble in grass. It's all been designed to be strong and printable with minimal support, except the rails, where using supports saves a lot of material.
Total print time on prusa XL is 2 days 10 hours. 1.6Kg of material at .2LH 15% infill with snug supports and brim on rails only
Updated 6/11/25
- Updated all hardware to use M3 Screws
- Added Trailer hitch component for mounting to the vehicle
- Updated Bill of materials
Bill of Materials
The only non-printed part is a small 18"X24"(As shown) piece of ¼" MDF or plywood, and hardware.
Wheel Mounts:
- 8X M3X12 button head bolts
- 8X M3 heat set inserts
- 8X M3 washers
Trailer Tongue
- 5X M3X15mm button head bolts
- 5X M3 heat set inserts
Trailer Hitch
- 6X M3x12 flat head bolts
- 6X M3 fender washers
- 6X M3 nuts
Side rail(As shown)
- 24X M3X20 flat head bolts
- 24X M3 heat set inserts
Rails
The side rails interlock for strength. assemble the rail using the integrated tabs. Slip the assembly on the side of the MDF or plywood bed, then mark the bed and remove the rails to drill through the bed. Finally, reinstall and bolt in place using M3 flat head bolts. Bottom holes are sized for M3 heat press inserts.
Print rails with support, with the side of the rail down for best strength and appearance.
General Printing Notes
All parts are sized to print on 6"X6"X6" print volume.
Assembly Notes
Leave the hub nuts loose, with about 1/32" space between the wheel and the nut, then insert the nut lock through the face of the hub nut to prevent the wheels from backing out.
To attach the trailer hitch, locate the hitch where you want it, then clamp it in place and drill 6X M3 clearance holes. Bolt in place using fender washers and 3mm bolts.