Rail guards for OneWheel GT
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€9.42 – €11.51 net (excluding VAT)
For file: OneWheel GT Rail Guards_0.4n_0.2mm_PETG_XLIS_8h7m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.47 excluding VAT (range midpoint).
- Weight reported by the author
- 193 g
- Print time reported by the author
- 8.11 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Add some color and protection to your board
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 65
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
These were made from a 3D scan of an actual board for a perfect fit, the outer face prints flat on the print bed for optimal adhesion.
Sadly, these do not fit on the MK4 or CORE One print bed, even individually, even at an angle, you will need an XL.
Suggest printing in PETG, but since it's going to be held to the board with 3M VHB tape perhaps PLA is acceptable and won't warp in direct sunlight.
Also see my other model: Screw caps for OneWheel GT
This is not a Onewheel or Future Motion branded product, nor is the publisher/distributor affiliated with Onewheel or Future Motion in any way. Onewheel is a registered trademark of Future Motion. The use of Onewheel here is for identification of manufacturer compatible products and does not imply any affiliation or endorsement by the Onewheel brand owner.