Rail guards for OneWheel GT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add some color and protection to your board
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
These were made from a 3D scan of an actual board for a perfect fit, the outer face prints flat on the print bed for optimal adhesion.
Sadly, these do not fit on the MK4 or CORE One print bed, even individually, even at an angle, you will need an XL.
Suggest printing in PETG, but since it's going to be held to the board with 3M VHB tape perhaps PLA is acceptable and won't warp in direct sunlight.
Also see my other model: Screw caps for OneWheel GT
This is not a Onewheel or Future Motion branded product, nor is the publisher/distributor affiliated with Onewheel or Future Motion in any way. Onewheel is a registered trademark of Future Motion. The use of Onewheel here is for identification of manufacturer compatible products and does not imply any affiliation or endorsement by the Onewheel brand owner.