Tiny S.E. DualColor Ladybug (fusion360)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This, smaller than a coin, ladybug/ladybird is easily printable in two colors, even without a multicolor system.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
I recently started the geocaching hobby as a means to go more oustide, but while my pleasure is to put things inside the geocaches they aren't always that big. In extreme cases (thin lab tubes for example), my tiny frog can still be too big so I made an even smaller model for these occasions.
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.
Printing information:
- Scaling up/down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first then to scale it as you wish.
- Split the model to its parts before printing them both separately, when done, they should simply slide into each other
- Due to its smallness use a 0.2mm nozzle
- No supports are needed
- A brim is recommended for both parts as it will help with bed adhesion.
---
Erratum (11/06/25): Addition of .step and .stl files for each part separately, following @WavingLinus_2335862's need.
Erratum (21/07/25): Addition of a version with looser tolerances