Bowden guide for Creality Multi-kilogram spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach the bowden tube assy to your spool holder directly.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the arm and back on the side without support. Use at least 1.6mm walls and 25% infill for strength.
Requires heat set insert https://www.mcmaster.com/93365A162/, and ¼-20 socket head cap screw 1 inch long https://www.mcmaster.com/91251A542/ ,, but I did provide the STP file so you can make a self-threaded version.
The nut is designed to accept a 1/8" npt fitting like the PC4-M10 https://a.co/d/046C1dO.
I made it a separate item so you can edit and tune that component to fit your need and screw it in later.
This is a follow-on from the spool guide here I had originall designed to prevent spontaneous spool un-rolling.
https://www.printables.com/model/373230-creality-multi-kilogram-spool-holder-filament-guid