Japanese Style Inspired Table - 60x30x36(H)cm and 60x30x58cm(H) Heights
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small table designed around the measurements of a wooden shelf 30x60x1.8cm
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
My partner's son needs a low table for his PC mouse and keyboard, I decided to print one for him starting from a shelf bought at DIY measuring 30x60x1.8cm. The structure is simple to assemble, the crosspieces, the side battens and the corners of the frame fit together with dovetail joints, while the other decorative battens and the legs are connected with plugs. I have already created the holes for 10 partially threaded Ø3.5x20mm screws letting them to penetrate into the shelf for 12mm. I recommend creating pilot holes in the shelf before inserting the screws, and using glue on the joints of the long crosspieces to reinforce them.
The joints and the plugs have been designed with a clearance of .2mm. The clearance of the holes for the screws is .2mm for the smaller (Ø3.7mm) and 1.2mm for the larger (Ø7.7mm).
Print settings (edit 2025.08.04):
Perimeters: 2
Infill: 8% Gyroid
Layer Height: .2 for straight pieces, .12mm for refined pieces.
Supports: only to support the leg's larger holes.
I've also uploaded my 3mf Bambu Studio, printed, project.
If you like the project and print your own table, please add a make and a like :)
EDIT 2025.06.15:
I added decorative panels inspired by the kumiko woodworking technique. Those on the short sides are inspired by the "holding hands" pattern and those on the long sides by the "kakuasa" pattern. I did not create joints for their assembly because they represent an extra, if installed it is necessary to glue them to the frame.
EDIT 2025.08.04:
Asked to create a taller version of the table, I've added a leg extension and a 45mm plug that fits the different holes in the original design (15mm) and the ones in the new extensions (30mm). The total height of the table is 58cm. If you plan to print the tall variant, don't print the 19x30mm plugs, they aren't needed for that.
