1 / 1
basic Michelson Stellar Interferometer frontplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A design for a basic 3D printed Michelson Stellar Interferometer as described in the 1919 paper.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
This model is a design for a basic stellar interferometer. It requires 4 small elliptical mirrors (40mm minor axis). There are holes for reinforcement rods (ideally carbon or aluminium). This design was the final design of a project I did. This alone is not sufficient for getting sharp interference fringes which can be measured. That requires a linear dispersion corrector. The overall print time is around 30 hours.
- Made for an 8 inch newtonian
- Neptune 4 max
- 300mm/s
- pla+