Tetra Pak milk cap opener - Fridge magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The new caps on Tetra Pak and Pure Pak are hard to open for children and old people. This fridge magnet helps you.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I made a version of the Tetra Pak and Pure Pak cap opener with a twist. My version got magnets so you can store the thing on your fridge, close to your milk.
Tested on Pure Pak and Tetra Pak milk containers in Sweden.
Add a color shift in your slicer at the layer before it is time to “cover” the magnets with plastic. Place to magnets in the holes and start the print again. You need two 12x3 mm neodymium magnets. I bought mine from AliExpress.
I printed with 0.6 nozzle on a Prusa MK3S+
I used 4 perimeters for strength and 15% infill. 0.3 mm layer height.
PLA works fine, but you can also print in PETG or TPU.
(Maybe print it at 98% if you print in TPU. I haven't tested it)