1 / 2
Sheath for Morakniv 164
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A blade cover for the Mora 164 spoon knife (right handed version).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 1
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
For the pivot this remix uses a M3x25 bolt and a nylon lock nut. You could probably just use a normal nut, if it's all you have.
It stays closed magnetically with two internal magnets, one in the lid and one in the base. Just pause the print and insert them. The magnets are 10x2mm round.
No supports are needed. There is a 1 layer thick sacrificial layer in the bolt hole. Just poke a nail through it or something.
This one was printed at 0.2 layer height, with a 0.6 nozzle. I printed mine in wood PLA so I can stain it later.