Safe Key Faraday Remote Key Fob Safe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect your car from theft with this Safe Key enclosure.
- Rating
- 4.5 / 5
- Likes
- 23
- Downloads
- 91
- Makes
- 2
- Views
- 724
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Protect your car from theft with this Safe Key enclosure.
This protects your keyless entry equipped car from theft. The thieves are using an amplifying device that receives the radio signal from your key fob, sending it on to a second thief at your car who can then unlock it, start it and drive off.
Check out this video!
Moment thieves use hi-tech device to steal £25,000 keyless BMW
When your car remote fob is in this Safe Key enclosure, the bad guys can’t intercept the signal, unlock your car and drive away.
The Safe Key enclosure is based on the Faraday cage principle which blocks radio signals.
Check out my other designs at:
Printables steve__3d | Printables.com
If you think the design is ok, hit the like button. Or if you've got some improvement ideas, or anything else, leave it in the comments.
If you print it, leave a pic in the Makes, I'd like to see it.
PRINT INFO
Print settings I used:
Print the outer with 3 walls, this makes the latch stronger.
Any filament would be suitable, mine is PLA silk outer shell and regular PLA for inner shells and lock rings
No brims
No supports
You need to print:
-one outer shell
-one inner shell lid
-one inner shell base
-two lock rings
It's pretty simple to put together, but here’s a link to assembly instructions if needed:
You will need:
Aluminium foil 130x160mm to cover the inner shell base
Aluminium foil 140x170mm to cover the inner shell lid