10MM PET BOTTLE STRIP TRIMMER V1
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
ā¬1.73 ā ā¬2.11 net (excluding VAT)
For file: TRIMMER V1 TOP GCODE.gcode
This is an estimate for one file. Youāll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: ā¬1.92 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the authorās weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
š§µ 10mm PET Trimmer V1āMinimalist Precision Tool Trim your PET STRIPE into a perfect calibrate one!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons ā Attribution ā Noncommercial ā NoDerivatives
š§µ 10mm PET Trimmer V1 ā Ultra-Minimal Precision Cutter
Meet the 10mm PET Trimmer V1, your ultimate tool for turning irregular PET strips into clean, perfectly measured filament feedstock ā with not a single gram of plastic wasted in the design. This little beast is engineered for efficiency, reliability, and zero-fuss use, especially for those who recycle PET bottles into 3D printing filament.
Ā
š§ What It Does
Got a strip from a bottle that's anywhere up to 17.75 mm wide? Feed it through this trimmer and get a precise 10 mm-wide strip on the other side ā every time.
Itās especially useful to salvage the curved base and neck areas of bottles, helping you get more usable material and ensuring a more consistent diameter in your final filament.
ā Smart Blade System
This V1 model is split into two lightweight parts to avoid structural overkill and warping during printing. It uses two standard 18mm snap-off utility blades, which fit snugly into the guide slots. No fancy tools, no special parts ā just smart, simple engineering.
š§± Assembly Made Simple
Top & base connect using four small screws (even tiny wood screws work just fine).
The trimmer mounts to your bench with two additional screws for stability.
Allergic to screw? Check my CORE RAIL V1 Collectionā š
šŖ Easy Access & Maintenance
The top has two viewing holes so you can monitor the strip while trimming.
The base features two side exhaust channels to let trimmed PET flow out freely without clogging.
Designed for quick maintenance ā you can clean or replace blades without disassembling the whole setup.
š¬ Join the Community!
If you print it, use it, or modify it ā weād love to hear from you!
š Leave a like, drop a comment, and share photos of your prints and setups.
Letās recycle better, together! ā»āØ