1 / 5
AirPods Lightning Charging Dock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalistic 3D-printed charging dock designed for Apple AirPods with a Lightning connector.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
A minimalistic 3D-printed charging dock designed for Apple AirPods with a Lightning connector.
Features
- Compatible with the official Apple Lightning cable
- Clean, minimal design
- Clever cable integration to secure the connector in place
Cable Assembly Instructions
- Insert the Lightning port into the through-slot from the back.
- Twist the port 90° to align it with the holding slot.
- Push the port down into the slot.
- Route the cable through the slot underneath the dock
- this helps retain the connector and prevents full pull-out.
Limitation
The Lightning port is held in place by friction. When lifting the device, the connector may be pulled slightly, which can lead to minor surface scratches on the port. The cable routing mechanism prevents the connector from being fully removed, but does not eliminate this issue.