Snap Together Case Arduino Uno + Adafruit 1/2 perma proto board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't happen to have a prototyping shield board so I put together my project on a perma proto board I had lying…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I didn't happen to have a prototyping shield board so I put together my project on a perma proto board I had lying around and made this case. Everything snaps together. Optional button lines up with a pushbutton mounted on the proto board.
The pins the uno snaps into are pretty fragile due to their size... probably won't withstand removing and re-adding the board. Don't fear if the tops break off you can just drill a little hole in the remaining post and use a short screw.
Case has built in strain relief for cables included.
Category: Electronics