Easy photo/paint booth from corroplast, hardboard, or cardboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quickly assemble a photo/spray booth of any size with these easy to print joints.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 45
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
General:
A simple set of brackets to quickly assemble your photo/paint booth from corro-plast or cardboard.
Why I designed this:
I wanted to take better photos for Printables and my 3D prints for my own website.
Printing notes:
- Layer height: .2 or finer
- Recommended Material: PLA or better
- Supports: None
- Infill: 15% rectilinear
- Walls: 3
- Other Modifiers: Print as oriented. A brim is recommended for the corner pieces, since they have minimal contact at the start of print.
- Material Quantity: ≈250 grams for a set of 4ea
I printed from PLA on Centauri Carbon at .2 layer height with 15% rectilinear infill And 3 walls.
Assembly Notes:
Install 2 corner pieces first, then side(flat) pieces for the bottom and back before doing the sides.
I suggest adding a top with a small usb light bar for photos if you don’t have a convenient desk lamp.
If you use this to make an airbrush booth, it’s easy to mount a high flow fan and filter on the coroplast back board, or you can use 1/8” hardboard for a sturdier setup.
Bill of materials:
- Corroplast: https://a.co/d/5tKdYEP or equivalent in whatever size you like. Cardboard works well too if you prefer to upcycle.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!

Also Check us out at:
https://fabtechmfg.square.site/