Air Tight Filament Dry Box and Spool Holder - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air Tight Filament Dry Box and Spool Holder - Remix
- Rating
- 4 / 5
- Likes
- 43
- Downloads
- 197
- Makes
- 2
- Views
- 1,829
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Great original model by Ondřej Stříteský, and great remix by EsotericMaker. After printing EsotericMaskers version I decided to make some changes for my personal setup. I moved the collet location to the bottom half, made the side walls thicker, added a stop for the hinge, removed the sensor cut out, and changed the base of the box to use a removable Prusa MINI spool holder. You will need 2 M3x30 and 2 M3x10 screws for assembly.
I also included the Ultimate Spool Holder by G.Design. I modified the size of the Base, Rails and Rollers to fit inside the Dry Box. You will need 4 M3x10 screws 4 M3 hex nuts and 4 bearings for assembly.
Share a picture if you print one!