1 / 4
Fluval Spec 5 Aquarium Glass Lid Rails Mod — image 1
1 / 4

Fluval Spec 5 Aquarium Glass Lid Rails Mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Alternate lid option for the Fluval Spec 5 Aquarium

Rating
5 / 5
Likes
20
Downloads
91
Makes
0
Views
1,397
Reviews
1

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

The plastic lid that comes with the Fluval Spec 5 Aquarium is extremely lacking. It doesn't have anything keeping it in place and has a long, open slit down the length of it that your fish can either jump out of, or your cat get in to.

I designed and printed these rails you can attach to both sides, and have a pane of glass or plexiglass cut at your local hardware store to fit. Use aquarium safe marine glue to attach them to the inside of the tank (pictured). I had the 3/32" (2.4mm) thick glass pane cut to 19 5/16" x 7". The 7" depth leaves about 1/4" overhang, so adjust down if you don't want that. If you leave a little overhang it gives you something to grab on to to slide it open/close. 1/8" or 3.2mm thick glass MIGHT fit as there is some wiggle room with 3/32", but I won't give any guarantees as I didn't try it. The height the rails rest at also leaves a very small gap between the glass lid and the tank glass, just enough for a little airflow but not enough for snails and the like to get out.

Print Settings

Printer Brand:

Dremel Digilab

Printer:

3D20

Rafts:

No

Supports:

Yes

Resolution:

.2mm

Infill:

30%

Filament: Unknown PLA Black

Category: Pets

Tags