Multiboard Shelf Mount Screw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting screw for the Multiboard that helps secure the board onto metal shelves (e.g., Husky)
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 48
- Makes
- 0
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This screw is designed to mount your Multiboard setup directly into a metal shelf. It uses the same screw threads as the Big Screw Multipoint, but features a shelf mount pin that slides into the shelf holes.
The front pin measures 7.8 mm in diameter and 2 mm long, giving it a snug fit in Husky-brand shelves and similar systems. The backing section of the pin is 11.8 mm in diameter and 6.5 mm long, making it feel very sturdy with no signs of slipping or bending.
It’s an easy way to anchor your Multiboard without any extra hardware. I recommend using at least two screws to prevent the panel from rotating. It’s also a good idea to place a piece of the Multiboard panel on your shelf first to check which holes line up. You might need to slightly offset the pin for the best fit.
Print Settings Used:
- Filament: PLA
- Wall loops: 3
- Infill density: 15%
- Infill pattern: Cross Hatch
- Supports: No