1 / 2
Strong Shelf Support V1-2 - Holds 30lbs! (Tested)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very strong shelf support that is easy to print. Test info and dimensions in description. New version out now!
- Rating
- 5 / 5
- Likes
- 412
- Downloads
- 877
- Makes
- 5
- Views
- 2,836
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Standard Digital File License
Test Information
I tested this hook using PLA+ at a 15% infill. I used a 20mm wood screw. 30lbs of resistance before breaking. Theoretically, using 4 or 6 supports (recommended) you could get up to 180lbs of bearing weight. Print at a 50% infill for strength. No supports are needed when rotated to be flat.
Dimensions:
- Length: 45mm
- Height: 45mm
- Width: 25mm
V2 Dimensions:
- Length: 50mm
- Height: 50mm
- Width: 25mm
- Thickness: 5mm
- Screw head diameter: 7.5mm
- Screw taper: 23 deg.
- Rounded edges: 2.5mm
Enjoy!