Angle Grinder Handle M6 (Iskra)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for an Iskra (or any other M6) angle grinder handle
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Designed as a near 1:1 replacement for the factory handle with some strength improvements. Printed in PLA @220c, 0.15mm layer height, 6 walls and 30% infill. Used a modifier body to make some internal ribs by setting the infill to 100% concentric for that body. This is needed as the screw is otherwise only connected to the rest of the handle by sparse infill.
A M6x40 hex head screw is inserted during the print, the pause needs to be manually set in the slicer. Since it sticks out of the bottom of the print, I added a sleeve around it to raise the entire print so that the screw can be inserted fully without hitting the build plate. It needs to be cut/broken off after printing.
The only way to print this is standing up, so supports are necessary.