1 / 6
Encased Spring Doorstop / Door Catch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a compact mechanical door latch designed around a spring-loaded hook mechanism designed by Matthew Houston
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 1
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
The enclosure prints in place with build plate-only supports. I tested it with 0.2mm layers. Works in PLA and TPU for AMS (68D TPU).
- 0.2mm layer height
- Build plate-only Supports (tree)
- Check the bridge direction parameter so the enclosure starts its first layer along the shorter path (see screenshot)
Second variant for an easy release using a little push bar. You might need to print this in TPU to properly mount it because of the screw behind. It's possible you can temporarily bend it slightly to tighten the screw from above or with a right angle adapter.