Dranjer F-Series Dehumidifer Inlet Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dehumidifer hose inlet cover for a Dranjer F-Series Sump Pump Inlet.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is a drop in replacement inlet cover for a Dranjer F-Series Sump Pump Inlet. It's designed to both allow water into the sump pump through the smaller inlet holes while also supporting a 15-18mm dehumidifer inlet hose in the middle.
This screws into the existing Dranjer F-Series. The hose inlet in the middle was specifically sized for a Midea Cube 35
This model uses 9.56 grams of filament, and takes 29 minutes to print on a P1S using the print profile outlined below. You can use less infill and wall loops if necessary, but you won't reduce the filament usage significantly. It can save you ~15 minutes of print time, however.
The inlet cover can be printed in PETG, ASA, or other moisture resistant filaments. I have printed this successfully in both PETG-HF and ASA, and will update how well they hold up with constant use.
Printing Guidelines
Materials: PC, ASA, or PETG-HF.
Infill: 40% Gyroid
Walls/Wall Loops: 5