1 / 3
Chip clip with press-fit magnet for easy storage. Only 6.2g! — image 1
1 / 3

Chip clip with press-fit magnet for easy storage. Only 6.2g!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A basic chip clip, but with a magnet for easy and convenient storage

Rating
3 / 5
Likes
26
Downloads
129
Makes
3
Views
378
Reviews
2

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

General:

Did I mention it's magnetic? also, I designed it to accommodate a wide range of bag thicknesses and to stay in place with gripping teeth.

Why I designed this:

I designed this because we never have enough chip clips around. Chip storage is right next to the fridge, so magnetic storage is super convenient. 

Printing notes:

Layer height: .15+

Recommended Material: PLA

Supports: None

Infill: 15% gyroid

Walls: 2-3

Other Modifiers: Print as oriented

Material Quantity: ≈6.2 grams

I printed from PLA on Centauri Carbon at .15 layer height with 15% gyroid infill in 11 minutes.

A 2x5mm magnet presses in by hand perfect.

 

_____________________________________________________________________________________________________________

Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.

Thanks, and Happy Printing!

Also check out:

https://fabtechmfg.square.site/

 

Tags