1 / 3
Chip clip with press-fit magnet for easy storage. Only 6.2g! — zdjęcie 1
1 / 3

Chip clip with press-fit magnet for easy storage. Only 6.2g!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A basic chip clip, but with a magnet for easy and convenient storage

Ocena
3 / 5
Polubienia
26
Pobrania
129
Wydruki
3
Wyświetlenia
378
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

General:

Did I mention it's magnetic? also, I designed it to accommodate a wide range of bag thicknesses and to stay in place with gripping teeth.

Why I designed this:

I designed this because we never have enough chip clips around. Chip storage is right next to the fridge, so magnetic storage is super convenient. 

Printing notes:

Layer height: .15+

Recommended Material: PLA

Supports: None

Infill: 15% gyroid

Walls: 2-3

Other Modifiers: Print as oriented

Material Quantity: ≈6.2 grams

I printed from PLA on Centauri Carbon at .15 layer height with 15% gyroid infill in 11 minutes.

A 2x5mm magnet presses in by hand perfect.

 

_____________________________________________________________________________________________________________

Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.

Thanks, and Happy Printing!

Also check out:

https://fabtechmfg.square.site/

 

Tagi