1 / 2
Lid or cover for large pots, pans, other round container for e.g. sous-vide — image 1
1 / 2

Lid or cover for large pots, pans, other round container for e.g. sous-vide

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A large lid for a pot, pan or other round vessel with a section that allows a sous-vide stick through. Click-together.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a modular design for a fairly large lid (270 mm diameter) that clicks together from two positive (pins) and two negative (holes) sections. There is a positive section that accommodates a sous-vide stick (~80 mm diameter). 

Printed with transparent PETG
Layer height: 0.22
Line width: 0.44
Walls: 4
Top shells: 4
Bottom shells: 4
Infill: Rectlinear 20%

This has worked fine for sous vide with temperatures up to around 70 c (158 f), but your mileage may vary. For temperatures at the higher end of sous vide, you may want to consider a more temperature-stable filament. 

For me, the print worked fine in terms of clearance right away, i.e. the holes were quite tight for the pins, but with a bit of convincing it became a robust lid. If the fit is more slack, the lid may not be as sturdy. 

It may be preferable to have it almost not fit until you clean off/shave off some material from the pins. 

Tags