FMS Ranger 1220mm Wing Strut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement wing strut for the FMS Ranger (1220mm). Slightly changed from OEM to make it easier to print.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 189
- Makes
- 1
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Replacement wing strut for the FMS Ranger 1220mm. This is nearly the same as the OEM strut save for a small flat spot that should be oriented down towards the bed.
Supports are necessary for the two small protrusions that connect to the fuselage and the wing. The strut should be printed in this orientation for maximum strength.
Infill can be as low as your printer can reliably print, but I recommend at least 3 walls (1.2mm) and 5 top/bottom layers (1mm)
As designed the strut is for the left wing. Simply mirror it for a full set.