Tent Pole Eyelet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanging stuff inside the tent to the tent (roof) poles can be done easy with these click-on eyelets d22mm & d25mm
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Design
Designed for the need of hanging stuff inside my tenttrailer to organize stuff. I created these eyelets to fit on tent poles of 22mm and 25mm diameter poles. Each comes as an open and a closed version.
Testing
I tested the eyelets this summer, and i'm happy with the practical functionality. Works best with roof-tubes. I didnt measure the maximum weight it can carry though, but think of jackets, small bags (max 2 kilo's). A least dont use it as a hooke/eyelet to carry large weights, that wont be save and would require a different design.
Mounting the eyelets is just snap-on too the tube.
Removing it by tilting the eyelet with some force and snap it off.
Variations
- 22mm open
- 22mm closed
- 25mm open
- 25mm closed
Incase variations/adaptions/improvements of the design would be needed, please let me know.
Material
Material that works best, as some flexibility is needed: PETG
Note: I didn’t test other materials.
Print settings
I applied the following settings:
- Layer height: 0.25 structural
- Infill: 30%
- Model orientation: on the side
- Perimeters: 3
- Support: none
- Model import: -
Note: Please consider other settings incase you think this helps you or the design in any way.
Final thoughts
Please let me know if you print these models and what you think of it.
Any feedback is always welcome.
Have fune!
P.S. Also check my other creations: https://www.printables.com/@iibex_1686865/models
Acknowledgements
I began my 3D printing journey in 2023 — A deliberate step into a world that blends creativity with engineering. Drawn to the story and philosophy behind Prusa, I chose to start with one of their printers the MK4. As an engineer, I find this manufacturing method both fun and deeply educational. It challenges to think differently about how you (approach) design and builds: from individual parts to assemblies.
Updates
- Initial version(s)