tp-link omada EAP620 side mount for 10 inch rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A side mount for the eap620 to fit the 10 inch rack
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was making the 10 inch rack in 5u variant and wanted to mount a eap620 to the side for a all inclusive network i was building. it may fit other models as long as the spacing is about 53-54mm from outside to outside for mount holes on mount plate
My printer is not big enough to print it all in one, so I had to split the model up. I have attached the full model and both halves.
The hardware i used to put it together 1 was a m5 heat set thread and 35mm screw to lock the top over the handle bottom rail.
3x m3 heat set threads 1 to attach the 2 halves together and 2 used for the eap mount
note: the pic of the feet on the bottom rail has been adjusted in the model so they should sit on the bottom rail now for a better fit.
Print Settings
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
At least 3.
Infill:
15% or more.
Filament:
PLA+/PETG/ABS/ASA/PC/Nylon