Nozzles for Loctite 30ml glue tubes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nozzles for Loctite 30ml Vinyl, Fabric & Plastic glue tubes
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: I compared the strength of this Loctite glue against Bostik “Hard plastic” glue. Check out my other model uploads for “Glue tensile strength test object” for a brief summary of my test results. Spoiler alert, the Bostik glue tested a lot stronger than the Loctite glue. I still feel that the Loctite glue is sufficient for general assembly of models printed from PLA.
<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>
Nozzles for Loctite 30ml Vinyl, Fabric & Plastic glue tubes.
May also suit other tubes of glue, grease, etc.
4x different diameter outlet tips- 1mm, 1.5mm, 2.0mm, 2.5mm.
I'm not exactly sure what thread was used on this tube, but the closest suitable match I found was M12. I've included 2 different thread pitches for each nozzle- M12x1.0mm, and M12x1.25mm. The M12x1.0mm thread feels like the better choice on this particular tube, but I also made a 1.25mm pitch version too.
Each nozzle has the outlet diameter and thread pitch marked on it.
I print these at 0.1mm layer height to help keep the thread smooth, and with 2 perimeters, 15% gyroid infill, no supports or brim. They don't require much filament, so they're a good way to use up short pieces of leftover filament. I treat each nozzle as disposable and “single use only”.
If anyone Aussie's want to buy this glue, it's available from Bunnings.