1 / 4
CTEK charger socket mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Socket mount for CTEK charger to be mounted with panel screws
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 105
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A socket mount for CTEK charger to be mounted with 4x10 panel screws (or similar) directly to any plastic panel.
Socket is press fit in the mount. Tolerances of your combination of printer + material + settings might be a bit different, so you may have to scale it up or down by a couple percent.
Printed on MK4S from some generic ASA+CF, but pretty much any material will do, apart from soft flexibles. Brim might be necessary due to a small contact area. Print in the orientation as designed for optimal layer strength.