1 / 3
Bosch PS21 (GRS12V or GRS10.8V) Lithium Ion Bit Holder for Drill Driver — image 1
1 / 3

Bosch PS21 (GRS12V or GRS10.8V) Lithium Ion Bit Holder for Drill Driver

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This bit holder attaches without screws and uses NO MAGNETS due to the excellent design of the friction fit hex cutouts.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
141
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I scoured all the major model sites for bit holder for my beloved Bosch PS21 Driver. I printed out a bunch, but many were not the same drill model, or required magnets to be glued during the printer or after.  The original model that this remix is based upon was probably for a different drill as it was about 5mm too loose (overall width) but had a wonderfully designed friction fit for bits.  Using the great friction fit of the original and great fit on the back of the drill of the Bosch Blue holder on MakerWorld (that required magenets), I made the perfect FrankenBit holder.  It can most likely be used for those with GSR12V or GSR10.8 Bosch Drill Drivers.  My drill model is shown in Pic#2.  Perfect fit on drill and perfect friction hold on bits.  No magnets.   

Tags