1 / 5
Sunlu S4 FilaDryer spool filament antiblock bearing adapter V3 — image 1
1 / 5

Sunlu S4 FilaDryer spool filament antiblock bearing adapter V3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter replacing the shaft with bearings for filament rolling. It prevents empty spool to get off axis and block.

Rating
5 / 5
Likes
13
Downloads
91
Makes
1
Views
592
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Sometimes when spool is almost empty, it gets out of the roll axis inside the Sunlu FilaDryer and it blocks preventing filament to unroll. As a consequence of this event the printed item gets corrupted. In order to avoid this unwanted spool movement I have designed this adapter which fits nicely into dryer as a direct replacement of existing shafts with small bearings. It does not need any other external parts, glue or any advanced assembly. Print in place, give it a firm first move to release the printed bearing and it is ready to use. I have also uploaded the original Fusion 360 design, feel free to adapt it to your needs, check also the user parameters, it is parametric.

When printing, ensure you have at least 20% infill, supports none, seam position random (due to easy bearing first release) and at least PETg material as PLA will bend.

https://photos.app.goo.gl/8JkkA6nPuYcDehGm9

Once printed, releasing the bearing could become hard, pushing against the roll wall helps to release. After release, suggesting teflon lube on bearing, screw and contact surface between spool and holder.

Hope you like it, enjoy!

Tags