1 / 7
Anonymous Mask - Guy Fawkes Mask Remix — image 1
1 / 7

Anonymous Mask - Guy Fawkes Mask Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This Guy Fawkes–style mask is designed to fit an adult face comfortably.

Rating
0 / 5
Likes
32
Downloads
119
Makes
0
Views
556
Reviews
0

Updated at source:

Model information

Category
Masks
License
Standard Digital File License

Two sides to every revolution.

This Guy Fawkes–style mask is designed to fit an adult face comfortably.

Supports required. I recommend printing in PLA with standard supports and spraying one half with a primer while leaving the other side untouched (I covered half the mask with tape before spraying to give it that 50/50 look). Some cool color combos can be achieved this way.

Printer: Bambu Lab A1 (or equivalent)

Material: PLA (Black + White recommended)

Nozzle Size: 0.4mm

🔧 Basic Settings:

Layer Height: 0.2mm (standard for clean mask surface)

Walls: 3

Top/Bottom Layers: 5

Infill: 15-20% gyroid or grid (adds durability without excessive filament use)

🧊 Supports:

Support Type: Tree

Support Placement: Touching build plate only 

Support Density: 10-15%

Support Interface: Enabled

Support Interface Layers: 2-3

Z Distance: 0.2mm

💨 Cooling:

Fan Speed: 100% after first few layers (to preserve overhang quality)

📐 Orientation:

Print lying flat and with the nose pointing up

Tags