Anonymous Mask - Guy Fawkes Mask Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Guy Fawkes–style mask is designed to fit an adult face comfortably.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Standard Digital File License
Two sides to every revolution.
This Guy Fawkes–style mask is designed to fit an adult face comfortably.
Supports required. I recommend printing in PLA with standard supports and spraying one half with a primer while leaving the other side untouched (I covered half the mask with tape before spraying to give it that 50/50 look). Some cool color combos can be achieved this way.
Printer: Bambu Lab A1 (or equivalent)
Material: PLA (Black + White recommended)
Nozzle Size: 0.4mm
🔧 Basic Settings:
Layer Height: 0.2mm (standard for clean mask surface)
Walls: 3
Top/Bottom Layers: 5
Infill: 15-20% gyroid or grid (adds durability without excessive filament use)
🧊 Supports:
Support Type: Tree
Support Placement: Touching build plate only
Support Density: 10-15%
Support Interface: Enabled
Support Interface Layers: 2-3
Z Distance: 0.2mm
💨 Cooling:
Fan Speed: 100% after first few layers (to preserve overhang quality)
📐 Orientation:
Print lying flat and with the nose pointing up