Liczymy pasujące modele…
Halteklammern für Netzteile zur Untertischmontage. Anhand der Skizze können die Bemaßungen in Fusion 360 geändert werden (Breite und Höhe des jeweiligen Netzteiles) und die Konstruktion wird entsprechend angepasst. Bestes Ergebnis mit…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My wife needed a hook, that was easily removeable again, for our Christmas decoration and since I couldn't find any useful design I just quickly made my own. Nothing special, quick and easy print, designed to be used with Tesa…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
I have some old rollerblade rollers. on those i needed to change the buckle strap. But the strap is discontinued. So i maid one. Printed in pla, in extrem detail to have as much layer as possible to ensure the strengh. Unsaw the old…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
To do the upgrade you need the following parts: 1x Frontplate (printed) 1x USB Extension cable 1x Powerswitch Extension cable You can find the upgrade instructions here: installation guide If you want a backplate, have a look here:…
MASSIVE VISUAL UPGRADE FOR ENDER 3 PRINTERS POWERSUPPLY RELOCATION UNDER THE BED (IN TESTING) (Is not usable for PRO and V2) SUPPORT ME BY PAYPAL!!!: https://paypal.me/zltncsk If you woul like to see new upgrades for 3D printers, and…
Visual upgrade for Ender 3 Pro Printers Is not usable for Ender 3 and not tested on Ender 3 V2 (feel free to try it out for the V2) Support me by covering a coffee to get/keep me going! Venmo: @dannyjvj SUMMARY: After upgrading my PSU fan…
I made this for a specific power strip from Harbor Freight (national chain of hardware stores selling cheap (read crappy) hardwares). It works for other small power strips I have. I made it to bolt my power strip to pegboard but you can…
This is a remix of Worx 20v and 40v Battery Holders , which was incomplete and has not been updated in a year. The previous design did not allow the battery to seat fully. I have modified the design and now the battery clips in properly.…
With the new Raspberry Pi Zero W (Pi0W) having been released, I decided to design a case and camera mount for my 3D printers. And what a better day to release it than Pi Day 2017! This should work if you don't have the front acrylic panel…
A simple camera ring that replaces the one that comes with the camera (original part name is RAK-DC2) Prints without support if model is flipped upside-down. My settings for Bambulab: Quality: Wall generator: Arachne Strength: Wall loops:…
Mount a powerstrip with the keyholes to multiconnect. Multiconnect cutout is open so that it can be flexible to mounting locations of the multiconnector. I put the printed part on to the powerstrip first then slide it onto the…
These are some test prints I made to help level my bed while it's printing. They are currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D, etc. It helps to see…
I thought that my power board looked untidy, so I designed this box for it to sit in. The clip shows yellow pyramids which represent plugs in a 4 way powerboard underneath shown for illustration only. Note that this design requires the…
A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.
Almost a 1:1 Copy of the Powerstrip Small Base, with small improvements for printability. Printed in PLA, with 30% Infill, 0.1mm layer height, 4 perimeters, 4 top and bottom layers (which makes it pretty much solid). Obviously has to be…
Improved pull handle for the PS Doops velcro straps.
I was looking for a mount that fits my powerstrip, but most are made for ones with a bigger crosssection. Thi one fits powerstrips with the following dimensions: Width (back side/opposite of the plug ): 42 - 42.5 mm Width (at the rounded…
This connector plug fits the control port on a electric power steering pump to 02-08 Mini Cooper's. The units have 3 control pins and a main 12v power plug. To start the pump, pin-1 needs to be connected to 12v+, and then pin-2 needs only…
The power button broke on my Hoover PowerScrub Deluxe Carpet Cleaner. Ended up making a new design that pops in. I'm sure it can be improved on, but definitely better than not having the button.
Powerstrip mounting bracket, designed for 25 mm thick workbenches. At least two prints per power strip required, as well as two zipties. Onshape link Use as inspiration, print at your own risk. In case of questions feel free to reach out.
Need to disassemble the station, remove the old sockets and replace with printed ones Printing with supports In my case, the fill rate is 100% link to disassembly and replacement video: https://youtu.be/s3aDQyGAlJo Category: Electronics
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time. The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and…
The power button broke on my Hoover PowerScrub Deluxe Carpet Cleaner. Ended up making a new design that pops in. I'm sure it can be improved on, but definitely better than not having the button.
Friction fit lens cover for a Canon PowerShot SX240 or SX260 digital camera. Designed to be attached with a small keyring to the camera's wrist strap. May or may not be able to pop off on its own when the lens extends. Printing in PLA is…
Holder for a powersupply to snap on the legs of an EQ5 mounts legs. Powersupply tied on with cable-ties. Printed in PETG at 0.2mm layer height with no support. Print both parts flat and use M3 heated inserts to add thread to the bracket.…
Iron Maiden Eddie Coaster Set Powerslave Pharoah Tribute 100mm
This connector plug fits the control port on a electric power steering pump to 02-08 Mini Cooper's. The units have 3 control pins and a main 12v power plug. To start the pump, pin-1 needs to be connected to 12v+, and then pin-2 needs only…
ATTENTION !!!! -> Before start, you must know what are you doing, if place the cables inverted will burn your dsi, the ground is next to the cartridge connector, and the postive is next to the leds side, see the picutres, if you have…
This model displays the Cannon PowerShot SX260 HS Camera in a cool and stylish way
The original cage has evolved slightly. The right handle has been replaced by a knob so kids can better reach the shutter button (age 6-10). Model for smaller hands:
Wallmount for Worx PowerShare Batteries. Can be easily placed side by side. Screw holes are covered by the insert. I used PLA and PETG. It is tested with 2.0, 2.5 and 4.0 Ah batteries. Please note, that this wallmount does only fit the…
The rubber-like cover on the battery compartment lid of the Canon PowerShot SX210 SI becomes brittle over time. Unfortunately, I couldn't find this part as a separate replacement part. So why not try 3D printing? I made the middle part…
!!! Be carefull by handle with high voltage !!! This is a case for a powersupply that I used in my Prusa i3 clone. I use it with an extern power swich (because of that there two holes beside the hole for the outgoing 12V cabels). You will…
This is an OpenGrid-compatible mount for the square Samsung BN44-01013A 48W power supply , used with various Samsung monitors such as the Samsung U28R552UQU . The model was created using the parametric modeller by BlackjackDuck . It…
This model has a single color version + 3mf + OBJ (obj is a test file, you can drag it into the Bambu slicer and choose the amount of colors you want to use on your printer. The downside is that you need to manually scale the object to…
Sovol SV06 ACE - Meanwell LRS 350 cover Another design of a Meanwell LRS 350 cover for SOVOL SV06 ACE. I tried matching the orginal design from Sovol, for better optics. You can use the orignal screws from the stock powersupply.…
Small holder for 2 Worx Powershare 20v accus. Including mounting holes. I was tired of having the batteries lying around the workshop, so i created a small holder for 2 batteries to be attached to a wall.
[English] Universal power strip bracket (for wall or under-desk mounting). Secures with 4 screws, then tightens the power strip with two zip ties. Compatible with all power strips, regardless of size. [Francais] Support de multiprise…
Very good Silencer with complex silencer canals. Is scince 06.20 on my Printer in use. Make sure you dissamble the PSU and only losen one screw! Then screw the thing on, after that losen the next. Print Settings Printer Brand: Creality…
Protects the camera and helps children taking pictures To help children learning photography, I've designed a cage with two handles. All buttons, the battery compartment and even the flash remain accessible. The tether is also maintained.…
Straight twist lock oil funnel. Originally designed for 6.7 powerstroke in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill
My neighbour asked my for a replacement of the broken cover of his RV. I designed (TinkerCad) a new cover: Base plate (PETG) for flexibility. Separate retainers for optimization and tensioning purpose. Printed lying (ASA) on the bed, for…
This is a parametric wallmount for power supplies. With cable hotswap cabel channel. I'm sure i have seen something like this bevor, but i couldn't find it anywhere so i made my own with ondsel (FreeCAD should work also). Have Fun. I…
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year
This adapter can be used to avoid drilling four holes per panel into your ceiling. Print four of them, modify the base to your needs, print and just click them into your Skylight. Prusas Textured Powder-coated Steel Sheet or similar…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Power strip mounting systems are horrible and a pain to use. In my case, the keyholes weren't even cut correctly so it was impossible for screws to move to the top of the keyhole. It's clear that the people who made mine don't even…
Printed with PLA and a Layer Height of 0.12mm. Infill of 30%. No supports needed.
Auf dem Markt habe ich keinen Cage für die Canon PowerShot G5Xii gefunden. Also hier nun meine Kreation. Die Kamera wird mit einer Schraube an ihrem Stativgewinde im Rahmen befestigt. Ich verwende diese:…
printed in abs and has been holding up well try and keep hardware from old one. mine broke i leant on it
Story: I was walking home after observation of C/2023 A3 (Tsuchinshan-ATLAS) comet. Our dog (labrador), happy to see me after 2 hours, jumped on me in a way I fell down on the ground. Unfortunately, I was holding the tripod legs, and I…
Alternative powersupply cover for Ender 3 Pro with Meanwell LRS-350-24 supply. I was shocked to discover that the standard power supply cover of my Ender 3 Pro is open on the bottom side and a contact of the power switch is exposed. If…
0.2 mm layer height, printed on PETG with supports
Need to disassemble the station, remove the old sockets and replace with printed ones Printing with supports In my case, the fill rate is 100% link to disassembly and replacement video: https://youtu.be/s3aDQyGAlJo Category: Electronics
For a better cable routing i need a Holder for cable strips, so i designed an easy cable holder for the side at my powersupply. If you want support me, buy me an coffee :-) buymeacoffee.com/3dwt
This is a mudguard which should fit to several Powerslide inline skating frames. It replaces the synchro brake and the Fusion360 file could be modified to fit any frame which is compatible with the brake. If you own the synchro brake for…
This is a replacement gear for the Fellows Powershred 8Cd. It should be able to print on most printers, with the finest detail being 0.62mm. The design was made it FreeCAD 1.0.0, with the gears workbench for the angles section, and the 7…
My Version of the Jackpot and Power supply Case for the Lowrider V4 from V1 Engineering https://www.printables.com/model/1034840-lowrider-4-cnc For the Power supply i'm using this 24V 120W one from Aliexpress:…
This is a cable clip inspired by https://www.prusaprinters.org/prints/109563-cable-clip-2022 but for TesaPowerStrips Small. I also changed the widths of the entire clip throughout to 2mm to optimize the print process and have consecutive…
Halter für ein Meanwell RS-50-5 Netzteil mit Platz für einen ESP ideal für WLED Holder for a Meanwell RS-50-5 power supply with space for an ESP ideal for WLED
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Power Strip Holder (Extension Cord) - Universal for Any Surface Our universal holder for power strips is designed to provide you with a practical and effective solution for placing your electrical strip on any surface. With this holder,…
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
I liked the power strip support, but had not enough space on the sides. so i just rearanged the holders to be screwed in front and back. i printed it with minmal support, just to make sure it comes out great. you can also print it without…
I made this belt clip holder so I don't need to keep my heavy power bank in my pocket during long play sessions. I recommend printing in PETG, the flexibility gives the belt clip some resilience. Default settings with tree supports should…
No more crowded desk space and dust protectors on the floor - just screw up your dell power brick to your desk/wall etc. Best for permanent bricks - if you carry your dock around more often, grab another. Fits for 180W Power supply. If…
Compatible with HP DPS-750RB A Server powersupply. It will probably work on most HP powersupplies that have built in fans. Useful for charging lipo batteries or anywhere you need up to 750 watts of 12v power! To assemble, short the first…
Low UFS frame for Powerslide Sabres 4 Ice Blade, size L/XL. UFS-mounting to the boot and normal 8mm axles to secure the blade into the frame.
3D Printed Mount for Brennenstuhl Power Strips : This mount is designed to securely attach Brennenstuhl power strips to flat surfaces, such as walls or desks. It's a practical solution to keep power strips organized and out of the way,…
A wall holder for Dyson gen5detect motor heads that can be mounted on walls using 6cm Tesa powerstrips. The strips I'm using should support up to 2kg, which is more than enough even for the heavy motor head.
E3NG dual Meanwell UHP-200 powersupply mount for E3NG dinrail (usually one 24v and one 48v). Also a DXF file is included for the backplate without the original fan hole.
Printed on a Prusa-Mini+ in (Prusament-) PETG with 30% infill, with 4 perimeters and 0,1mm layer height. Brim was used but is maybe optional. With the above settings printing takes 11 min on a Prusa Mini+.
Compatible with HP DPS-750RB A Server powersupply. It will probably work on most HP powersupplies that have built in fans. Useful for charging lipo batteries or anywhere you need up to 750 watts of 12v power! To assemble, short the first…
Simple shroud for a meanwell lrs350 power supply, 100mm tall, 68mm extends below the power supply, 4.75mm (based on 5mm, additional tolerance brings it to 4.75) wall thickness (except for the flush side) Notes: Uses existing hardware from…
Work in progress. I wanted a mobile adjustable PSU that can be powered by 18v batteries
Use tesa powerstrips small to stick it to he wall: https://www.tesa.com/en/consumer/tesa-powerstrips-small.html I printed it in PETG with supports and 0.2 mm layer height.
This specific powerstrip is particularly prone to tipping over, because it has a round underside with two small “feet” for screw mounting. These printable feet are mounted to the powerstrip using the wall mount screw holes. They prevent…
Why AllPowers 21W AP-SP-002-BLA controller s*cks from the factory and needs to be replaced to unleash all the power of the solar panels inside, please read here . If you replace the weird controller and the battery from this model with…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
Powerslide NEXT parts Size M Fully tested on 42-43.
Print the plug holder with -1mm z so it does not need support and it still works fine. The plug holder snaps into the top screw hole. Both printed with PETG beacause its better for outdoor, temperature and light.
VZbot lower left grill with power socket hole for socket that comes with Tronxy X5SA
Saw one of those in my local Hackerspace and had to made one myself. Had a look around but didnt like the ones I found, so I made my own. Uses these components: XY6509S Power supply module…
2x2 gridfinity bin that holds the Canon PowerShot SD1400 IS camera. Also, includes slot for charger. Text is in the .3mf files and not the STLs. This works with the gridfinity grid system.
Do you want to cool your ecoflow powerstream and spend an equal amount of money as buying the existing ecoflow product but dont feel like buying it? Then here's the solution for you: The EcoFlaw Powerstream Fan Housing for you to print.…
Robitornic Powerswitch Holder and Cover for the Reciver Box The Switch https://shop.robitronic.com/de/robitronic-elektronischer-schalter-r01612 the cover closes the hole from the manual switch the holder / cover fits on the buggy and…
Features Mounts to left or right table leg Clip-in system for Brennenstuhl power strips (PSU) Two variants: 54 mm hole spacing Customizable hole spacing with OpenSCAD Printing & Assembly Instructions Print the mount in the default…
Support pour 2 PowerStream de la marque ECOFLOW pour ventilé avec un ventilateur de 140mm Imprimé en PETG ou supérieur et TPU pour les patins. 1 capot 1 socle 1 support de socle coller le socle sur le support de socle il faut deux…
This casing is visually dedicated to the Cudy TR3000 (AX3000) Wifi6 Router - which run on OpenWRT :) (Chinese or clean image) (but of course it will work with practically any device that needs 5v, and up to 3A) Inside we mount the UPS…
This is a replacement for the Eureaka Powerspeed filter mount. The filter mount is printed in PETG. It includes the files to replace the o-rings. I printed them in TPU as two sets of square rings which work fine.
3 piece mount for 4ft powerstrip, printed in PLA+ print at 100% infill or with enough walls to make solid
![[WLED] Meanwell Netzteil halter mit ESP / Meanwell Powersuply wallmount with space for an ESP](https://media.printables.com/media/prints/111343/images/1096842_455c95d2-c3c2-4014-8ea5-8287614b5ccb/screenshot-2022-01-03-081033.png)
